Dana 44 Knuckles, GM Style, Pair, 4 Bolt Arms

Product Code: RRD44GMKnuck

This is a pair of GM style Dana 44 knuckles manufactured by Reid Racing (Dedenbear). They will fit Dana 44 and GM 10 bolt front axles and will accept GM style, 6 bolt spindles and related outer parts. They can be used as direct replacements for GM knuckles when doing steering conversions or when heavier duty parts are required.

These knuckles feature:

  • Chevy/Jeep spindle bolt pattern accepts ″outers″ from all open knuckle Chevy and Jeep Dana 44, Dana 30, and 10-bolt front ends to 1986
  • Cast from high strength ductile iron
  • Beefed up with extra material and ribbing
  • Flat tops machined and drilled for high steer arms
  • 4th bolt hole for high steer arms increases clamping force and sheer strength
  • 3 bolt high steer arms still fit
  • 3/8″ thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
  • Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
  • Tapered tie rod holes accept factory tie rod ends
  • Tie rod holes can be drilled to accept 3/4″ heim ends
  • Powder coated bright orange for long lasting looks
  • Interchangeable with all factory and aftermarket Dana 44 components
  • Fully machined and ready for installation
  • Machined to clear CTM u-joints without removing the grease fittings
  • Tie rod hole is tapered from the top to the bottom
This is a pair of knuckles.

Manufacturer: Reid Racing



Thompson's Foothill Offroad uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.