Upper Control Arm Brackets for Triangulated 4 Link Suspension SystemsFeatures Adjustable Antisquat
These brackets are used as frame side mounts for upper control arms in a triangulated 4 link suspension system. They are universal in design, in that they may be welded to any frame rail up to 4″ high and 2.5″ wide. The control arm pockets are angled 20 degrees to work with typical long arm suspensions. The pockets are 2″ wide with 10MM holes to accommodate a wide variety of control arm joints. Since it is conceivable that a mounting hole might interfere with a top or bottom plate, the plates have notches to clear hardware and tools.
Antisquat can be tuned by positioning the upper control arms in any of the four holes. This provides adjustability for various applications and tunability to match a driver's preferences.
The brackets are pictured tack welded together in a typical configuration. They ship unwelded so that the installer may position frame height and bracket location to meet the specific installation.
Brackets are laser cut and formed from 1/4″ steel. They are sold in pairs.
Share This Page