Rock Assault Double Ended Steering Ram Kit
8″ Ram with Clevises
Through years of research, development, and testing Trail-Gear engineers have developed a double ended ram to meet the tough demands of top level rock crawling competitors and the toughest trails in the world.
Most rams on the market only have one rod seal. Trail Gear started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. They also included two wiper seals in the design to make sure that dirt and debris stay on the trail and don't get into your steering system. In addition, they designed our ram with a Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston.
In true Trail-Gear style it also had to make our ram the strongest on the market, so a feature has been added that you will not see on any other ram on the market. It is designed with a piston wear band and a rod bushing. The bushing allows the rod to absorb much higher side loads. They also machined the piston shaft out of a single piece of 4340 chromoly. Other rams on the market use a two-piece welded or threaded piston shaft that can fail under severe loads.
The Double Ended Ram and Clevis Kits have a 6″, 8″, or 10″ stroke x 2.25″ bore x 1.125” rod. The cylinder has a black zinc-plate finish while the rod has 3/4x16 female threads on each end and is made entirely out of 4340 chromoly material.
This kit includes an 8 inch ram and clevis kit that has 8 total inches of travel and was made to work with Dana 44's and custom length Dana 60 applications.
Kit Includes:
- (1) 8″ Double Ended Ram
- (4) Cylinder Clamps
- (2) Clevis Ends
- (2) Clevis End Bolts
- (2) Grade 8 Bolts
- (4) Spacers
Hoses and linkages to steering arms are sold separately.
Share This Page